What is No-Till?
I recently posted this picture of amassed corn stalk residue on my The Farmer’s Life facebook page with the description “Water has caused crop residue to accumulate in some areas creating a thick mat. In our no-till fields. We may have to burn a few of these to assist the planter in placing seed correctly.” The first comment on the photo resulted in the post you are reading right now. That comment read “What’s a no till field? Why would you not till a field?” A great question. There are many kinds of tillage including not tilling at all.
What is No-Till? No-till is just what is sounds like. A true no-till system avoids disturbing the soil with tools like chisel plows, field cultivators, disks, and plows. Not all of our acres are no-till, but we have been doing less tillage as of late including putting more acres into no-till. I’m 32 years old and I’ve never actually ran a moldboard plow over a field aside from the single acre we took turns playing on a few years ago in our 1956 John Deere 70 Diesel and three-bottom plow. I might lose some farmer points here, but I don’t even know how to plow a field properly. Lack of experience I guess. A plow could be considered the polar opposite of no-till. A plow flips over the top layer of soil incorporating nearly all residue into the soil. No-till relies on natural processes to break down residue from the previous crop. Advantages
- Reducing fuel, labor, and equipment costs are the most quantifiable benefits of not doing any tillage. Our current tillage system normally includes a fall chisel plow pass to manage residue followed by a pass, or two, with a field cultivator to prepare a seed bed for planting. This system would be called minimum or conservation tillage by some, but right off the bat a no-till plan cuts at least two trips across our ground out of our budget. If we quit doing tillage over our whole farm we’re looking at removing a couple of gallons per acre of fuel from our expenses. Take the price of diesel today times our just over 2,000 acres of farmland and you’ll get a fairly substantial number. That’s also fewer hours on a tractor meaning more value at trade-in time, and less wear and tear on tillage tools. In fact I believe if we went 100% dedicated no-till we could sell off all our tillage tools and downsize one tractor from our lineup. We’ve recently purchased a John Deere 2623VT vertical tillage tool, but let’s keep things simple for now.
- Improved soil structure is another big benefit. Tillage disrupts the natural structure of soil and releases some of the carbon soil organisms thrive on. Soil biology plays an important role in providing crops with the water and nutrients they need.
- Potential for erosion can be reduced by leaving more residue on the surface in the months when there are no crops growing. Residue allows for rainwater and snow melt to infiltrate the soil rather than causing surface run off that will carry away topsoil and nutrients. Of course if enough rains falls on already saturated soils you’ll have some runoff no matter what. We are experiencing those conditions right now.
- Reducing soil compaction is a great benefit. Soil gets compacted any time equipment drives over the surface. The weight of farm equipment compacts the air and water pockets present in soil that allow for the movement of water, crop roots, and soil organisms. Combines and grain carts are the worst offenders because they are very heavy. Since no-till reduces the amount of equipment a field sees the threat of compaction is reduced. Compaction cannot be avoided completely, but it can be managed by limiting field traffic to certain areas. Subsoilers and cover crops can also correct compaction issues.
- With no-till a farmer has lost the ability to mechanically control weeds through tillage. Biotechnology has been given some credit for increasing no-till acres because technologies like Roundup Ready have made weed control by herbicide very effective both in performance and cost. Herbicides with residual action can help stem weed growth post-plant. Row crop cultivators are nearly a tool of the past for conventional farmers. We used to go back into our fields during the growing season and pull a cultivator between the rows in order to slow down weeds enough to give the crop a chance to canopy over the open space to shade out weeds. Row crop cultivating takes resources such as time, labor, fuel, and causes wear on equipment. We now employ cover crops on some of our no-till acres, and some covers are good at suppressing weeds. Cereal rye is one of those covers. I’ve seen organic no-till accomplished by growing a cereal rye cover crop which is later terminated with a roller-crimper ahead of planting. The thick mat of rye keeps weeds at bay.
- There is a risk of carrying over plant diseases when crop residue is not incorporated into the soil after harvest. The residue serves as a host for disease and can infect the following crop. However farmers can mitigate this situation by rotating crops that are not susceptible to the same diseases.
- It takes time to see the benefits of no-till. One can’t take a farm that has been tilled for 50 years or more and hope to see big gains in yield after one season. Patience is important. Soil needs time to regain structure, and that doesn’t happen overnight. Right now we have a some fields that will be going into no-till and using cover crops between cash crops. I plan to keep this system in place for a few years, and then we’ll see what kind of results we are getting from soil nutrient tests, water infiltration, compaction, and yield.
I think our farm needs to be leaning towards less tillage or none at all in the future, and right now we are headed that way. In recent history we have sold off our ripper, a soil finisher, and traded our disk for that vertical tillage tool I mentioned. We are expanding our cover crop acres which will more than likely be no-till acres as well. Do you think we are headed in the right direction?
This post was originally published on The Farmer’s Life on April 15th, 2013. View it at “What is No-Till?”